Viral Socialite

Plywood is probably one of the woods which so many people use, but there is some planning to be done, when you want to cut this product. You will want your project to turn out properly, so a few tricks will helps you on your way. Everyone, no matter the level of expertise, can always use some tips for any project they are working on. We will discuss some, which will benefit you when cutting the plywood material. These tips will save you some time and your project will be even sturdier in the end.

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.

Table saw-Cutting
with this saw will require some adjustments. The first one you will need, is having an extension to your saw, as most plywood is so long and wide. You could get another table to be the extension, or maybe a sawhorse, to support the plywood as you push it through the saw. Make sure first of all, that the piece of plywood has the best side facing upwards. This will keep the cut from becoming jagged looking, but it is still difficult to push the plywood through, so keep a steady hand and guide it through smoothly. It will not be quite so hard to do, when the pieces are on a smaller scale.

Circular saw
When using a circular saw, it is always a good idea to use a guide for the saw, and this will help to keep it straight, as it is a very difficult to cut the line straight with this type of saw. It is not as easy as you might have expected, as this type of saw is really very affordable to buy, which of course is a good thing. Sometimes you will have to re-cut the first spot, as it could take some practice to get this right. Sliding table saw-This type of saw has a sliding table which then runs along through the saw blade. The table is built into the saw, which makes it so much easier to get a proper cut, without having to make more adjustments later on. Your cuts will be more accurate, so you will not be so frustrated with your efforts.

Plywood has a tendency to chip, so it is important to use the proper kind of blade, which is intended for plywood. This is very important if you are cross cutting, with things to take into consideration is the amount of the teeth on the blade and the width of it.

Maybe you are just starting to be a woodworker, then if you want to use plywood, the best saw to purchase would be a circular saw, along with a saw guide, or a table saw, which will not cost you an arm and a leg. If you plan on cutting a lot of this type of wood product, then you might consider buying a saw such as the sliding table or panel saw that is vertical. Whichever you decide on, please be careful when using any type of saw.

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.

With basic woodworking skills and a few tools, you can make a closet organizer. Would you believe with a single sheet of plywood, a clothes pole and a few feet of 1×3 lumber you can double your 5-foot closet storage space. To buy a custom-made closet organizer can cost hundreds of dollars. However, with these materials you can make you own and save over 70% of the cost.

Listed below is everything you need for your closet organizer

Hammer
Finish nails (6d and 8d)
1×3 lumber
One 4×8 foot sheet of ¾-inch thick plywood
Tape measure
Framing square
Circular saw
Clothes pole
Six clothes pole brackets
screwdriver
Paint or wood stain

One single sheet of plywood yields two 11 7/8 inch-wide sides (A), two long 11 7/8 inch wide shelves (B), and six 11 7/8 inch square shelves.

You can see what just a few tools and very little material you are able to make an organizer for a closet that will give you 2 long shelves across the top of the closet and 6 small shelves down the middle with room for hanging clothes on both sides. You can use one closet pool for long clothes and 2 on the other side for shorter clothes.

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.

This is a great woodworking DIY weekend project.

If you ever wanted to dress up a room in your house for a small investment and a huge wow factor is to add molding. You can add crown molding to your ceiling, which makes any room look like a million dollars. Another nice touch is to enlarge you baseboard molding. Many people have hardwood floors or tile floors and a larger baseboard gives your room an elegant look.

I think that is why so many of us a drawn to older homes. They always have beautiful moldings around windows and doorways, even archways. At first, it can sound daunting to even try to do a molding project. However, with the right tools and a little practice you will be able to put molding up in your home.

Listed below are the tools you need:

sharp pencil
measuring tape
router with edging bits
miter box
coping saw
wood molding
finish nails
nail set

If you have a sharp pencil and sharp saw in a quality miter box, you are ahead of the game. Those are the most important tools because molding is all about tight fitting joints. If at this time, you cannot buy a quality miter box or power miter saw, try renting first.

Here are some basic instructions for installing trim and moldings. With a little practice, you can start and combine different molding to your taste. Miter Box and backsaw is used to cut precise angles on finish lumber, like mitered moldings for window and door casings. Cut casings at 45-degree angle with the flat edge tight against the horizontal bottom base of the miter box. Baseboard miters are cut with the molding tight against the vertical rear base of the miter box.

Cut cove molding by positioning ceiling side of the molding tight against the horizontal bottom base of the miter box. Wall side of molding should be tight against vertical rear base of your miter box. I know that all may sound so complicated, but believe me it really is not. Just rent what you may need and try it. You will be amazed how after a few tries you get the hang of it.

These are just two examples of what you can accomplish with woodworking DIY. You can build a basic closet organizer or beautiful finishing carpentry. Your options are endless.

There is always another woodworking project around the corner that will interest you. Everyone one is different so you will never be bored.

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.

Why Use Wood?

Welcome to the beginner’s woodworking guide. You may have worked with wood in the past, but this article makes no assumptions and will start at the very beginning. First, there are a lot of practical reasons for using wood to build your furniture and crafts. Here are a few of the benefits of using wood for your projects:

• Wood is sturdy and can last a lifetime
• It’s eco-friendly
• Can be inexpensive without sacrificing on quality
• Wood has the appeal of nature
• Doesn’t require many tools for beginners

Keeping it Simple

As a beginner, you may be tempted to go to the hardware store and purchase a new set of tools or even some power tools. The experts in woodworking don’t buy tools unless they have a clear need for them in their projects. You should adopt the same approach when you begin woodworking so you can spend more of your time and money on what you actually need. Your first woodworking projects should be built exclusively with hand tools. Focus on the fundamentals of woodworking such as:

• Measuring
• Cutting
• Shaping
• Joining

If you don’t know how to do any of these things, don’t worry, we will address that in the next section. For now if you’re unfamiliar with properly using tools, you may also consider purchasing a kit with printed instructions and a list of the tools needed to complete the project. The wood in these kits is typically pre-cut into the finished shapes to make it even easier.

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.

Here, I’m going to go over my 3 favorite easy woodworking projects for new woodworkers. These projects are inexpensive and can easily be completed in a few hours to a day, so let’s get into some fun and easy woodworking projects.

1. Build a bluebird house. This is one of my favorite easy woodworking projects for adults that want to introduce kids to woodworking. Birdhouses don’t have to be perfect when they are finished and you can decorate them anyway you like. Birds are thankful for anything you throw together for them. This task can be completed with minimal power tools if any and there are free plans all over the internet for bluebird houses. One reason that this is such a fun project is that once it is completed, you get to hang it up outside and see how long it takes to get an occupant. You can probably complete this project for under ten dollars in lumber.

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.

2. Make a small wooden box. This is another fun and easy woodworking project that can be completed for under ten dollars depending on the size of your box. Wooden boxes can be very plain and useful or they can be adorned with fancy hardware, hinges and hasps and used to decorate a room. Wooden boxes can also make great gifts to give away at birthdays and holidays. Everyone likes a neat little box, especially if you stuff it with things they like.

3. Make a wooden shelf. This is as easy as it gets in our easy woodworking project lineup. The simplest of wooden shelves just need a top (to put things on) and a back so you can mount it to the wall. You can either put hangers at either end on the back of your shelf towards the top and hang it on a couple of nails if you are going to put lightweight items on it or you can drill holes in the back and mount it with screws or anchors to the wall if your shelf is bigger or you plan to put heavier items on it.

After twenty years of making things out of wood for myself and to give to others I can tell you that woodworking is a super fun and rewarding hobby and you don’t have to think big to get started. Why not go get a board and make something today?

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.

Blueprints or woodshop plans are only a small part of a successful project. Over the years I have learned that tools of the trade make a huge difference in the enjoyment of the project and a successful completion. Take the work bench in the shop for instance, is one of yours on locking rollers? A bench that can be rolled around the shop makes handling the woodworking project much easier. Just being able to roll the project outside for drying or rolling it into the paint booth without picking it up and having to place the item on another stand eliminates oil marks from your hands and the possibility of dropping it. In either case you are eliminating possible delays or in essence problems.

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.

Is your paint booth in a corner of your woodshop? Placing your paint booth in the corner where you can hang a curtain on two sides of the booth can eliminate many problems. Put the curtain upside down on the bar with the shower hooks put thru the curtain, make your own holes. On the bottom where the rod would normally be insert some small lead weights like you would see on a casting net. Space the weights six inches apart and sew the ends close. Your curtain should be six inches from the ceiling and just touching the floor. This will eliminate 90 percent of the dust particles, bugs, and draft blowing thru the room. It truly makes for a much easier finished product with little or no do overs.

The last item in this article will be about where you store your paints, varnishes, stains, and other smelly and dangerous chemicals and liquid items. Kitchen cabinets are great for putting can type items out of sight and off the ground. Go on Craigslist and you can find old cabinets for just a few bucks and hang them on a back wall. Just inside the doors apply very thin weather stripping so when the door closes it has a little bit of a seal. I have found this can eliminate many of the odors associated with your finishing and stripping products. It is also a lot safer storing these items behind closed doors.

I hope I have given you some helpful ideas to incorporate into your woodshop so future woodworking projects go easier and end on a good note.

EDITORS NOTE:

The best resource on the net for woodworking plans and projects is woodworking4home. Check it out now.